Professional Lab PETG filament is a reliable choice for those who expect a combination of high mechanical strength, chemical resistance, and an aesthetic appearance.
Product features
Visual transparency: PETG offers excellent transparency (88%–92% light transmission), making it ideal for visual models, display items, and transparent containers.
Mechanical properties: It features high tensile strength (50–70 MPa) and high flexibility (elongation up to 300%), making it suitable for applications that require both strength and impact resistance. It also withstands repeated stress.
Heat resistance: The filament retains its shape when moderately heated (70–85 °C at 0.45 MPa). It prints smoothly at temperatures between 230–260 °C.
Chemical resistance: PETG is not easily affected by acids, alkalis, alcohols, or oils, making it a reliable choice for items exposed to chemicals.
Printability: It offers smooth extrusion and strong adhesion during printing, allowing detailed and complex designs to be printed. The material can be easily polished or bonded during post-processing.
Printing recommendations
- Nozzle temperature: 230–250 °C
- Build surface material: PEI, glass
- Build plate temperature: 80–90 °C
- Cooling fan: 0.7
- Print speed: 30–70 mm/s
- Raft separation distance: 0.2 mm
- Retraction distance: 7 mm
- Retraction speed: 20 mm/s
- Ambient temperature: room temperature–60 °C
- Overhang threshold angle: 60°
Technical specifications
- Filament diameter: 1.75 ± 0.03 mm
- Filament length: ±330 m
- Weight with spool: ±1180 g
- Empty spool weight: 180 g
- Spool diameter: 195 mm
- Spool width: 59 mm (AMS-compatible)
- Spool opening: 75 mm (compatible with AMS Lite only with an adapter)
Drying recommendations
PETG absorbs moisture from the air, which can cause problems such as bubbles or poor layer bonding. For the best results, dry the filament before use.
- Drying temperature: 70–85 °C
- Duration: Usually 4–8 hours, depending on the condition of the filament and the equipment. Check the progress after 4 hours and extend the drying time if necessary.
- Recommended equipment: For the most consistent results, use a dedicated filament dryer. A kitchen oven can also be used if monitored carefully.
- After drying: Use immediately or store in a sealed bag with desiccant to prevent it from absorbing moisture again.
| Color | Blue |
|---|---|
| Material | PETG |
| Weight | 1000 g |
| Filament diameter | 1,75 mm |
| Diameter tolerance | ± 0,03 mm |
| Nozzle | 230 - 250 °C |
| Heatbed | 80 - 90 °C |
| Printing speed | 30 - 70 mm/s |
| Nozzle type (recommended) | Brass (Standard) |
| Enclosed chamber | Not Required |
| Compatible | Bambu Lab AMS, Bambu Lab AMS Lite With Reducer |
| Diameter | 1.75 mm |


